Fall 2023 Course Syllabus Course: CETT-1321 (Section: 1, CRN: 91910) Electronic Fabrication

Instructor Information
Instructor	George Bohn
Email	bohngw@lamarpa.edu
Phone	(409) 984-6391
Office	Umphrey Industrial Technology Center - Room: 201 C
Office Hours	Office Hours: M 3 - 5 pm, T - 4 - 5 pm, W 1 - 5 pm, R 1 - 2 & 3 - 4 pm, F 1 - 5 pm
Additional Contact Information
Course Information
Description	A study of electronic circuit fabrication techniques including printed circuit boards, wire wrapping, bread boarding, and various soldering techniques.
Required Textbooks	Textbook Purchasing Statement: A student attending Lamar State College Port Arthur is not under any obligation to purchase a textbook from the college-affiliated bookstore. The same textbook may also be available from an independent retailer, including an online retailer. None
Additional Materials/Resources	Soldering Station Set  Beginning Soldering Kit Resistance Substitution Kit Capacitance Substitution Kit Power Supply Kit
Corequisites/Prerequisites	None
Learning Outcomes	Apply electronic circuit fabrication techniques to industry standards Document step-by-step procedures Create schematic/wiring diagrams Apply circuit description Identify the tools required to produce a printed circuit board Produce soldering connections.
Program Student Learning Outcomes	•Identify control panel indicators, calibration tools, electrical parts, and how they work. •Utilize a multimeter and oscilloscope to differentiate between two AC signals with respect to voltage, current, and power. •Apply electronic circuit fabrication techniques to industry standards. •Explain the static and dynamic aspects of processes. •Analyze level and gas measurements to determine proper operating parameters of specific process and electrical equipment. •Demonstrates standard safety procedures as required in industry.
Lecture Topics Outline	CETT 1321 “Electronic Fabrication”  Fall 2022 Mr. Bohn Lecture on Solldering techniques and Safety Work on soldering techniques  Soldering wire and componentes Work on Kit 1 Work on Kit 2 Work on Kit 3 Work on Kit 4
Major Assignments Schedule	CETT 1321 “Electronic Fabrication”  Fall 2022 Mr. Bohn – Tentative Schedule Week 1: Introduction to class; course syllabus Week 2: Lecture over fabrication techniques Week 3: Lecture over soldering techniques Week 4: Kit 1--begin working on kit Week 5: Kit 1--continue working on kit 1 Week 6: Kit 1--completion of kit 1 Week 7: Kit 2--begin working on kit 2 Week 8: Kit 2--continue working on kit 2 Week 9: Kit 2--completion of kit 2 Week 10: Kit 3--begin working on kit 3 Week 11: Kit 3--continue working on kit 3 Week 12: Kit 3--completion of kit 3 Week 13: Kit 4--begin working on kit 4 Week 14: Kit 4--continue working on kit 4 Week 15: Kit 4--completion of kit 4 Week 16: Final Check of Kits
Final Exam Date	December 11, 2023 - 8:0 AM   Through  December 11, 2023 - 9:0 AM
Grading Scale	90 - 100=A 80 - 89=B  70 - 79=C   60 - 69=D  Below 59 = F
Determination of Final Grade	Projects - 80% Attendance/Participation - 10% Final Check-Out - 10%
Course Policies
Instructor Policies	There will be a check done of each kit upon completion. Good soldering techniques and clean soldering are grading criteria along with kit being completed/working. The course grade will be the average of all of your grades on the kits and the Final Kit Check-out grade. CELL PHONE POLICY - Please put cell phones out of sight and on mute during all class times. Using cell phones during class times is distracting to other students, if you must take a call or make a call, please go into hallway to do so. If there are repeated violations you will be dismissed from class for that day and counted as absent.
Attendance Policy	As class attendance is crucial to making a passing grade, after 5, 7, & 9 class periods have been missed; a letter grade will be dropped after each and after 11 missed class days a failure will be recorded for the overall grade. After the class period begins, you will be counted tardy unless there is a recognized excuse. Sleeping in class will be discussed in an after class meeting with me. Class absences can also have recognized excuses, with each being handled on a one on one basis with the instructor.
Additional Information
Institutional Policies
MyLSCPA	Be sure to check your campus email and Course Homepage using MyLSCPA campus web portal. You can also access your grades, transcripts, academic advisors, degree progress, and other services through MyLSCPA.
Academic Honesty	Academic honesty is expected from all students, and dishonesty in any form will not be tolerated. Please consult the LSCPA policies (Academic Dishonesty section in the Student Handbook) for consequences of academic dishonesty.
ADA Considerations	The Americans with Disabilities Act (ADA) is a federal anti-discrimination statute that provides comprehensive civil rights for persons with disabilities. Among other things, this legislation requires that all students with disabilities be guaranteed a learning environment that provides for reasonable accommodation of their disabilities. If you believe you have a disability requiring an accommodation, please contact the the Office for Disability Services Coordinator, Room 231, in the Madison Monroe Building. The phone number is (409) 984-6241.
COVID 19 Information	The Lamar State College Port Arthur (LSCPA) Student Code of Conduct COVID 19 Policy requires students who have been diagnosed with COVID 19 to report their condition directly to their local health department. Students should also contact their course faculty to report their quarantine status. In addition, this policy requires all students to wear face coverings when directly exposed to COVID 19 in compliance with the criteria included in the policy. For more information please refer to the COVID 19 link on the LSCPA website.
Facility Policies	No food or tobacco products are allowed in the classroom. Only students enrolled in the course are allowed in the classroom, except by special instructor permission. Use of electronic devices is prohibited.
HB 2504	This syllabus is part of LSCPA's efforts to comply with Texas House Bill 2504.
Mandatory Reporting of Child Abuse and Neglect	As per Texas law and LSCPA policy, all LSCPA employees, including faculty, are required to report allegations or disclosures of child abuse or neglect to the designated authorities, which may include a local or state law enforcement agency or the Texas Department of Family Protective Services. For more information about mandatory reporting requirements, see LSCPA's Policy and Procedure Manual.
Title IX and Sexual Misconduct	LSCPA is committed to establishing and maintaining an environment that is free from all forms of sex discrimination, including sexual harassment, sexual violence, and other forms of sexual misconduct. All LSCPA employees, including faculty, have the responsibility to report disclosures of sexual misconduct, including sexual harassment, sexual assault (including rape and acquaintance rape), domestic violence, dating violence, relationship violence, or stalking, to LSCPA's Title IX Coordinator, whose role is to coordinate the college's response to sexual misconduct. For more information about Title IX protections, faculty reporting responsibilities, options for confidential reporting, and the resources available for support visit LSCPA's Title IX website.
Clery Act Crime Reporting	For more information about the Clery Act and crime reporting, see the Annual Security & Fire Safety Report and the Campus Security website.
Grievance / Complaint / Concern	If you have a grievance, complaint, or concern about this course that has not been resolved through discussion with the Instructor, please consult the Department Chair.
Department Information	Business and Industrial Technology Chair: Sheila Guillot Email: guillsr@lamarpa.edu Phone: (409) 984-6381